PART 3: RESEARCH AND CHOOSE THE COMPONENT USE IN MINI PROJECT

Based on the selected title, we have been able to detect some of the components that we'll use for our project, these components are:

1. Resistor

We have use the resistor of this project. Resistors are common elements of electrical networks and electronic circuits and are ubiquitous in electronic equipment. High-power resistors, that can dissipate many watts of electrical power as heat, may be used as part of motor controls, in power distribution systems, or as test loads for generators. Fixed resistors have resistances that only change slightly with temperature, time or operating voltage. 

2. Capacitor

We have use the capacitor of this project. A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric. 

3. LCD Display

We have use the LCD display of this project. A liquid-crystal display (LCD) is a flat panel display, electronic visual display, or video display that uses the light modulating properties of liquid crystals. Liquid crystals do not emit light directly.

4. Strip BOARD

We have use strip board of this project. Stripboard is the generic name for a widely used type of electronics prototyping board characterized by a 0.1 inch (2.54 mm) regular (rectangular) grid of holes, with wide parallel strips of copper cladding running in one direction all the way across one side of the board.

5. Silicon lab toolstickk850-b-sk

We have use silicon lab of this project. The purpose of the ToolStick is to provide a development and demonstration platform for Silicon Labs microcontrollers and to demonstrate the Silicon Labs Simplicity Studio software tools.

The ToolStick development platform consists of two components: the ToolStick Base Adapter and a daughter card.The ToolStick Base Adapter provides a USB debug interface and data communications path between a Windows PC and a target microcontroller.The target microcontroller and application circuitry are located on the daughter card. Some daughter cards, such as the C8051F850 Daughter Card, are used as general-purpose development platforms for the target microcontrollers and some are used to demonstrate a specific feature or application.